Page 5 of 16
Posted: Mon Jan 19, 2009 3:29 am
by Likort
How I set up irrNettLite 2 Beta with DevCpp:
(Originally I was going to post my error messages and ask for help but I could finally solve all of them)
(I guess for most of you this was super easy but as it took me some time to figure it out I'll post it for people who are too scared to ask
)
Add \irrNetLite2Beta\irrNetLite\include to Include Directories
Add /irrNetLite2Beta/irrNetLite/lib/libirrnet.a to Linker
Add example1.cpp to Project
Compile: [Linker error] undefined reference to `irr::net::createIrrNetServer(irr::net::INetCallback*, unsigned int, irr::net::SNetParams const&)' etcetc
Add CNetManager.cpp, SPacket.cpp to Project
Compile: [Linker error] undefined reference to `enet_initialize'
Get libenet.a from
http://www.allegro.cc/files/download-at ... &id=689470
Add ../../irrNetLite2Beta/irrNetLite/lib/libenet-mingw/libenet.a to Linker
Compile: [Linker error] undefined reference to `compressBound'
Get zdll.lib from
http://www.zlib.net/zlib123-dll.zip
Add ../../irrNetLite2Beta/irrNetLite/source/zlib/zlib123-dll/lib/zdll.lib to Linker
Compile: [Linker error] undefined reference to `htonl@4' etc
Add C:/Dev-Cpp/lib/libws2_32.a to Linker
Compile & Link: success -> Crash
Copy irrNetLite2Beta\irrNetLite\source\zlib\zlib123-dll\zlib1.dll to Project Directory
Finally, the Question "Client (c) or Server (s)?" pops up.
Works with example2.cpp too
Posted: Mon Jan 19, 2009 5:24 am
by BlindSide
Haha, quite a journey there. I hope you find the examples informative.
Posted: Mon Jan 19, 2009 10:17 pm
by Likort
Sure, they are easy to understand. You kept it really clean.
Maybe if you got some time you could try to port your IrrNet 0.36 examples 1 2 3 4 to irrNet2+irrLicht 1.5 too as they are a bit more interactive.
Anyways, I ran into a small problem playing around a bit. I use an irrKlang Example to record some audio and would like to send it then with irrNet to another client. But I am getting the following error message:
Code: Select all
recordclient.cpp:141: error: ambiguous overload for 'operator<<' in 'packet << &data'
SPacket.h:23: note: candidates are: irr::net::SOutPacket& irr::net::SOutPacket::operator<<(irr::c8) <near match>
SPacket.h:25: note: irr::net::SOutPacket& irr::net::SOutPacket::operator<<(irr::u16) <near match>
SPacket.h:27: note: irr::net::SOutPacket& irr::net::SOutPacket::operator<<(irr::u32) <near match>
SPacket.h:29: note: irr::net::SOutPacket& irr::net::SOutPacket::operator<<(irr::u8) <near match>
SPacket.h:31: note: irr::net::SOutPacket& irr::net::SOutPacket::operator<<(irr::s16) <near match>
SPacket.h:33: note: irr::net::SOutPacket& irr::net::SOutPacket::operator<<(irr::s32) <near match>
SPacket.h:41: note: irr::net::SOutPacket& irr::net::SOutPacket::operator<<(const irr::c8*) <near match>
SPacket.h:43: note: irr::net::SOutPacket& irr::net::SOutPacket::operator<<(const irr::core::stringc&)
SPacket.h:45: note: irr::net::SOutPacket& irr::net::SOutPacket::operator<<(const std::string&) <near match>
SPacket.h:47: note: irr::net::SOutPacket& irr::net::SOutPacket::operator<<(const irr::core::stringw&)
The various lines that lead up to this should be those here:
Code: Select all
irrklang::ISoundSource* recordedSound = recorder->addSoundSourceFromRecordedAudio("myRecordedVoice");
[...]
void* data = recordedSound->getSampleData();
[...]
packet << &data;
I guess I need to take something like this
Code: Select all
SOutPacket& SOutPacket::operator << (const u32 data)
{
enlargeBuffer(4);
memcpy(buff.pointer() + buff.size() - 4, &data, 4);
return *this;
}
and change it to be able to handle this:
virtual void* irrklang::ISoundSource::getSampleData ( ) [pure virtual]
Returns a pointer to the loaded and decoded sample data.
Returns:
Returns a pointer to the sample data. The data is provided in decoded PCM data.[...]
With the data variable I was already able to do stuff like
Code: Select all
irrklang::SAudioStreamFormat format = recordedSound->getAudioFormat();
[...]
unsigned long dataLen = format.getSampleDataSize();
[...]
fwrite(data, dataLen, 1, file);
You got an idea how to make your << operator able to handle it?
Edit: and as you're at it, the >> operator as well
Posted: Tue Jan 20, 2009 1:49 am
by BlindSide
I recommend casting the void* to a char* and copying it to a string. Then add the string to an SOutPacket and send that.
When receiving just put it in a stringc and retrieve the raw data using c_str().
Cheers
Posted: Wed Jan 21, 2009 11:44 pm
by Likort
I had issues with converting from and to chars and strings but after some time of thinking about slashing my wrists I was able to use an array of u32's. It's working now, thanks! And thanks again in general for the library.
Oh btw is there a limit to how much you can send in one packet?
Posted: Thu Jan 22, 2009 3:40 am
by BlindSide
There shouldn't be a limit. The underlying Enet lib splits packets up into smaller ones if they get too big, and re-orders them. Although I would suspect sending a really large packet (> 1 MB) may cause the app to hang unless you multithread it.
Posted: Fri Jan 30, 2009 10:14 pm
by MasterGod
BlindSide, are you still working on this project? How active is it?
Would you recommend using it in a large project? Like say.. a Game Engine?
Thanks.
Posted: Sat Jan 31, 2009 5:16 am
by BlindSide
How about you actually take a look at it and decide yourself
I'm sure you won't be disappointed
Posted: Thu Feb 19, 2009 12:37 am
by zerochen
hi
if i include irrlicht.h in the example the program crashs when it is in the client mode..
Unhandled exception at 0x00451c81 in Client.exe: 0xC0000005: Access violation reading at position 0xccccccd4.
if i debug the program
the debugger say that the error is here->
irrAllocator.h
Code: Select all
//! Deallocate memory for an array of objects
void deallocate(T* ptr)
{
internal_delete(ptr); <<--here
}
i use visual 2008
maybe this can important too->
> Client.exe!irr::core::irrAllocator<char>::deallocate(char * ptr=0x00366958) Zeile 40 + 0xe Bytes C++
Client.exe!irr::core::array<char,irr::core::irrAllocator<char> >::~array<char,irr::core::irrAllocator<char> >() Zeile 64 C++
Client.exe!irr::net::SOutPacket::~SOutPacket() + 0x2b Bytes C++
Client.exe!main() Zeile 94 + 0xc Bytes C++
Client.exe!__tmainCRTStartup() Zeile 266 + 0x19 Bytes C
Client.exe!mainCRTStartup() Zeile 182 C
kernel32.dll!7c817067()
plz help me:(
Posted: Thu Feb 19, 2009 2:04 am
by BlindSide
Did you read the warning at the top of the page that said you have to recompile the MSVC lib yourself else it will crash?
Posted: Thu Feb 19, 2009 2:45 am
by zerochen
of course i read it! but thats not the error
i compile the irrnetlite.lib
i can connect to the server and send something but after this the client crashs
if i exclude irrlicht.h the program works fine
Posted: Thu Feb 19, 2009 9:28 am
by BlindSide
of course i read it!
Haha sorry, I will expect better of you next time!
Can you post full source code of example app that causes this problem?
Thank you
Posted: Thu Feb 19, 2009 1:11 pm
by zerochen
i created a new project
included Tutorial.cpp from the irrnetlite2beta.zip
then i got many errors like this
LIBCMT.lib(crt0init.obj) : error LNK2005: ___xi_a ist bereits in MSVCRTD.lib(cinitexe.obj) definiert.
i changed the project settings from Multithreaded-Debug-DLL (/MDd) to Multithreaded-Debug (/MTd)
the programm works fine i can send und getting information without any errors
i included irrlicht.h at the beginning auf the tutorial.cpp
the program run a few seconds then i got an error like->
if i click debug i get->
[/img]
Posted: Thu Feb 19, 2009 6:04 pm
by BlindSide
I think its because the Irrlicht versions of irrArray, string, etc, don't match the ones provided with irrNetLite (For convenience and seperation). So delete all the Irrlicht included files that came with irrNetLite, then recompile the irrNetLite lib using irrlicht.h (Just include this in irrNetLite files) and it should be ok.
I will probably update the lib later on to have a #define that takes care of this.
EDIT: Oh yeah, if it is still causing you problems you can try not using a lib at all and just include all the irrNetLite and enet files (Except for the ones that already come with Irrlicht) as part of your project, always works for me!
Cheers
Posted: Fri Feb 20, 2009 1:15 am
by zerochen
jeeeeeeeeeeeeeha it works
big thx
