Fatal error C1010 what is this
-
- Posts: 11
- Joined: Sat Oct 15, 2005 3:07 am
- Location: DOGPOUND 5-CELL 48
Fatal error C1010 what is this
while i was doing the programing part in Visual C++ everything was going fine till i generated the code and found this:
fatal error C1010:unexpected file ending searching the precompiled heading directive
i need help so if anyone has the solution to my problem i'll be very thankful
fatal error C1010:unexpected file ending searching the precompiled heading directive
i need help so if anyone has the solution to my problem i'll be very thankful
-
- Posts: 31
- Joined: Mon Sep 05, 2005 4:47 pm
- Contact:
Try doing a full-rebuild. That's what I do whenever this happens to me. Usually has something to do with StdAfx.cpp (or .h)
GMan
Black Ninja Games
Black Ninja Games
-
- Posts: 11
- Joined: Sat Oct 15, 2005 3:07 am
- Location: DOGPOUND 5-CELL 48
check this link about your error:
http://codeguru.earthweb.net/forum/show ... p?t=251785
for full rebuild, got to project-clean and then project-build
http://codeguru.earthweb.net/forum/show ... p?t=251785
for full rebuild, got to project-clean and then project-build
OK now that i did what the link i was provided it solved my C1010 problem
but something else hapenned when i generated the code around 23 errors
were found (aaaaaaaaarrrghhhh.... i'ma about to shot my PC) some body help me........
anyway i'll post the list of errors later because my vsc++ IDE is in spanish
so i have to translate them it's goin to take me a time but if anybody knows about this and can help me it woul be greate
By the way thanks to those who helped me with the C1010 problem
thanks a lot
but something else hapenned when i generated the code around 23 errors
were found (aaaaaaaaarrrghhhh.... i'ma about to shot my PC) some body help me........
anyway i'll post the list of errors later because my vsc++ IDE is in spanish
so i have to translate them it's goin to take me a time but if anybody knows about this and can help me it woul be greate
By the way thanks to those who helped me with the C1010 problem
thanks a lot
-
- Posts: 11
- Joined: Sat Oct 15, 2005 3:07 am
- Location: DOGPOUND 5-CELL 48
-
- Posts: 11
- Joined: Sat Oct 15, 2005 3:07 am
- Location: DOGPOUND 5-CELL 48
somehow i made it to fix my recent list 23 problems (all my mistakes with programming are of syntax and gramatical errors but well that's not the point now ) but now i get the C1104 error and i specified this direction for the irrlicht.lib file C:\Irrlicht-0.12.0\Win32-Visualstudio what's the solution for this
-
- Posts: 11
- Joined: Sat Oct 15, 2005 3:07 am
- Location: DOGPOUND 5-CELL 48
-
- Posts: 11
- Joined: Sat Oct 15, 2005 3:07 am
- Location: DOGPOUND 5-CELL 48
well i did some recon the problem seems to come from the linker
because even i specified the direction for the irllicht. lib file it still points the Fatal Error LNK1104 could not open irrlicht .lib
it also says that it couldn't find the irrlicht .exe file
all this mistakes and errors are stoping me from developing my game aplication so if anybody can give me a hand i would really apreciate it
because even i specified the direction for the irllicht. lib file it still points the Fatal Error LNK1104 could not open irrlicht .lib
it also says that it couldn't find the irrlicht .exe file
all this mistakes and errors are stoping me from developing my game aplication so if anybody can give me a hand i would really apreciate it
-
- Posts: 11
- Joined: Sat Oct 15, 2005 3:07 am
- Location: DOGPOUND 5-CELL 48
the point is that i already corrected the precompiled headers deal
what should i do now
10:27 PM EDIT=well after following Piot tip i decided to re-check the precompiled headers deal it turned out that i didn't hit the aply button after
selecting the stop using precompiled headers YO piot thanks for the advice
but now all of sudden automaticaly after defenitly corretcting the precompiled headers deal
this happenned a new page called vector3d.h apeared with its on code already built
and this mistake in it ERROR C2857 the instruction #include specified in the lin commands option /ycstdafx.h in the source code file could not be openned any solution i'll try to fix this one by myself but if anybody already has the solution to this problem please tell me
10:50 PM EDIT=another problem showed up while vinculating(i did this for pure curiosity) Fatal error LNK1104:cannot open the debug\irrlicht.obj
any solution
what should i do now
10:27 PM EDIT=well after following Piot tip i decided to re-check the precompiled headers deal it turned out that i didn't hit the aply button after
selecting the stop using precompiled headers YO piot thanks for the advice
but now all of sudden automaticaly after defenitly corretcting the precompiled headers deal
this happenned a new page called vector3d.h apeared with its on code already built
and this mistake in it ERROR C2857 the instruction #include specified in the lin commands option /ycstdafx.h in the source code file could not be openned any solution i'll try to fix this one by myself but if anybody already has the solution to this problem please tell me
10:50 PM EDIT=another problem showed up while vinculating(i did this for pure curiosity) Fatal error LNK1104:cannot open the debug\irrlicht.obj
any solution
-
- Posts: 11
- Joined: Sat Oct 15, 2005 3:07 am
- Location: DOGPOUND 5-CELL 48
-
- Posts: 11
- Joined: Sat Oct 15, 2005 3:07 am
- Location: DOGPOUND 5-CELL 48
i checked the msdn library and it didn't gave me any answer or solution to my actual problem plus i decided to build and compile the user interface
everything went well when generating but when i started it it said that it couldn't find the iirlicht.dll file in which derectory i should place the irrlicht.dll file
everything went well when generating but when i started it it said that it couldn't find the iirlicht.dll file in which derectory i should place the irrlicht.dll file